Product Categories
Blast drying oven (production type)
Equipment Model
Function Introduction
Baking powdered materials to reduce moisture content and improve battery cell performance.
Equipment Performance
1. Oven liner: Made of 1.5mm stainless steel material, with a insulation layer thickness of 100mm.
2. Heating method: The furnace is equipped with a hot air circulation system, and the ventilation system is installed above the oven to achieve uniform temperature inside the chamber. One set of hot air circulation is used, and a horizontal air transport method is adopted
3. The heating and blowing pipe is made of stainless steel, which has a long service life
4. . The cavity is a single door structure, and the door is made of a whole piece of aluminum plate, which is not easily deformed and has explosion-proof effect compared to color steel glass, with a higher safety factor.
5. Vacuum ventilation function can be added (optional)
Parameters
| Project | Parameter |
| Power requirement | AC220V 50Hz |
| Total power of equipment | 4.5KW |
| Studio size | Height 400mm, width 450mm, depth 400mm |
| External dimensions | Height 690mm, width 850mm, depth 850mm |
| Operation temperature | Room temperature~150 ℃, continuously adjustable |
| Heating rate | Room temperature~100 ℃ ≤ 60 minutes (time for the instrument to reach the set temperature) |
| Heating system | Horizontal circulating air supply method |
| Shell material and color | Cold rolled steel plate, spray coating, computer ash |
| Temperature control method | Adopting PID electronic automatic constant temperature controller with over temperature alarm function, it can automatically disconnect the heating element |
| Temperature accuracy | ±0.5℃ |
| Temperature uniformity | ±3℃ |
| Over temperature protection | Secondary mechanical over temperature protection |
| Heating device | Stainless steel heating tube |
