Mainly used for the turnover, storage, stirring, secondary defoaming of rubber materials and battery slurries for processing, and to prevent sedimentation before coating or homogenization.

1. The main components of the equipment are: mixing section, upper bucket section, lower bucket section, dispersing section, wall hanging section, lifting mechanism, and base

2. The mixing drums, impellers, etc. that come into contact with the materials are made of 304 stainless steel

3. Scraping wall panel material: polytetrafluoroethylene, detachable design

4. Temperature measurement method: bucket wall mounted temperature probe detects material temperature

5. Transmission component bearings: High speed components are imported bearings, while low-speed components are domestically produced bearings

5. Vacuum maintenance:- 0.098Mpa, maintain pressure for 24 hours above -0.085Mpa, no leakage into the barrel

6. After the mixing drum is raised to its designated position, it is equipped with a locking protection system to prevent the drum from falling abnormally after reaching a high position during operation.

The dry mixing stage requires the stirring blade to rotate while lifting the bucket.